Skip to content

Initial product configuration#

Once the solutions is deployed, the next step is to configure it to work with your cloud. This process is called initial configuration and differs from cloud to cloud.

Alibaba#

Installation requirements Alibaba#

  • Golden image with Hystax Acura (provided by request).
  • Resources to launch a virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a virtual machine with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Cloud Agent. Created in each target / failover project.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443
      • Ingress -- tcp/4443
      • Ingress -- udp/12201
    • Hystax Cloud Agent (spawned automatically in the Target
      Project):
      • Ingress -- tcp/80
      • Ingress - tcp/15000

Installation steps#

1. Find the shared images in the cloud.

There should be two new images at the "Shared Images" tab: one for Hystax Acura Controller, and one for Hystax Cloud Agent.

shared_images

2. Create a Security Group for Acura.

create_sg

This SG should allow incoming traffic at the following ports:
  • tcp: 22, 80, 443, 4443, 30080, 30081, 30082
  • udp: 12201

sg_rules

3. Create an Acura VM.

Press "Create Instance" on the Acura's image and proceed through the wizard.

Required settings for the VM:

  • A flavor with at least 2 CPUs and 8 GB RAM.
  • Disk size should be at least 200 GB.
  • Assign a public IP address with maximum possible bandwidth. This IP will be used to receive replication data.
  • Choose the Acura security group you have created earlier.

Note

Adding a key pair during Acura's deployment is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to Alibaba official documentation on using SSH public-private key pairs.

There is no need to create a Cloud Agent instance -- only Acura instance is required. Acura will spawn and remove Cloud Agent instances automatically.

4. Convert a Public IP to an Elastic IP for Acura instance.

Acura instance requires a fixed public IP.

Find your freshly created instance, click "More → Network and Security Group → Convert to EIP". This will make it a fixed IP that will not be released if the instance is stopped.

convert_eip

5. Pass Acura's initial configuration.

Once the VM is started, wait approximately 20 minutes for it to boot up, then open its EIP in a web browser. Please accept the certificate warnings so that you are redirected to the initial configuration page.

Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_alibaba

Field Description Example
Access key ID Cloud API credentials. They can be obtained by hovering over your avatar in cloud interface and clicking “AccessKey”. CBAI5tKqEMoixoZQRLRLYZXV
Secret Access Key Cloud API credentials. They can be obtained by hovering over your avatar in cloud interface and clicking “AccessKey”. CBAI5tKqEMoixoZQRLRLYZXV
Region The region ID you’ve deployed Acura to. You can find a list of region IDs in Alibaba’s documentation. eu-west-1a
Cloud Agent image ID ID of Cloud Agent image acura
Security group The Acura security group ID you have created earlier. Cloud Agents will be created in this Security Group. Make sure that it allows Acura controller connect to Cloud Agent. default
Availability zone Availability zone where all resources will be created default
VSwitch ID The VSwitch ID Acura instance is connected to. Cloud Agents will be deployed with this network. acura-vnet/default
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Hystax Acura Control Panel Public IP Public IP that will be used to access the Hystax Control Panel via web browser and by replication agents 18.5.123.15

Other additional parameters:

Field Description
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent security group Security group used by Cloud Agents
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Key pair name Key pair name to access the cloud agent
Replicated volume performance level Performance level for volumes of replicated VMs
Replicated volume type Default volume type used to create volumes for replicated VMs
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

Click "Next" to start cloud validation.

Step 4: Once the validation is complete, click on the "Log in" button, and log into Acura Control Panel. Accept the certificate warnings if needed.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

Amazon Web Services#

Installation requirements#

  • Golden image with Hystax Acura (provided by request).
  • Resources to launch a virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a VM with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Cloud Agent. Created in each target / failover project.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443
      • Ingress -- tcp/4443
      • Ingress -- udp/12201
    • Hystax Cloud Agent (spawned automatically in the Target
      Project):
      • Ingress -- tcp/80
      • Ingress - tcp/15000

Installation steps#

1. Create a stack from the provided link to a CloudFormation template with Hystax Acura.

  • Select the "All Service" tab. Select the "CloudFormation" tab in the "Management & Governance" section.

cloud_formation

  • To create a new stack, click on the "Create Stack" button.

create_stack

  • Insert the provided link. Click on the "Next" button.

select_template

  • On the next page you will need to fill in the following fields:

    • Enter a stack name.
    • Enter an IP address from which access to HLCM's monitoring tools is allowed.
    • Enter a network for opening ports 443, 4443, 80 & 12201 (0.0.0.0/0 = public address).
    • Enter a network for VPC used by HLCM.
    • Enter an appropriate key-pair.

Note

Adding a key pair during Acura's deployment is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to AWS official documentation on using SSH public-private key pairs.

Click the "Next" button.

select_parameters

  • On this page you do not need to specify anything, just click the "Next" button.

iam_role

  • Сheck the box to confirm that you are familiar with the fact that AWS CloudFormation might create IAM resources. Click the "Create" button.

acknowledge_iam

  • Please wait while the stack is being created. It may take up to 20 minutes.

2. Open a web browser and go to https://<ip_address_of_the_machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete, and you will be able to start using Hystax Acura.

3. Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to the Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

4. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

5. Step 3: During the initial setup, the cloud will be configured automatically, you just need to click the "Next" button.

Step3_aws

If you are adding a new cloud or decide to edit an automatically created one, you will see the following form:

Step3_aws_new

Field Description Example
Cloud name The name of the cloud which will be shown in UI. The name must be unique. Hystax-acura
Access key ID Access key ID ABCAIZ5DMCH2LJPGPXYZ
Secret access key Secret access key for the access key ID aBCiGSq5GV88QahM8j8tfZVOw7Dvc8OLbatwUXYZ
Region Target region name eu-west-1
Key pair name Key pair name to access the cloud agent key-pair
Cloud agent AMI ID The image ID from which cloud agent instances will be spun up default
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage

Other additional parameters:

Field Description
Availability zone Availability zone where all resources will be created
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent security group Security group used by Cloud Agents
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Replicated volume type Default volume type used to create volumes for replicated VMs
Security group Name of the security group with all required ports opened
Subnet ID Default subnet ID for instances
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

6. Step 4: Installation is complete, and you can now log in to the system using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

MS Azure#

Installation requirements#

  • VHD with Hystax Acura (provided by request).
  • Deploy Hystax Acura from this VHD with not less than a Standard D4s v3 (4 vCPUs, 16GB RAM and 100GB disk).
  • Create an account for the application with Contributor rights, as described in the doc: https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal-portal
  • SMTP server with TLS/SSL encryption.

  • Security Groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443;
      • Ingress -- tcp/4443;
      • Ingress -- udp/12201.
    • Hystax Cloud Agent (spawned automatically in the Target
      Project):
      • Ingress -- tcp/80;
      • Ingress - tcp/15000.

Installation steps#

1. Create a machine from the Hystax Acura VHD with key pair attached.

Note

Adding a key pair is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to Microsoft's official documentation on adding an SSH public-private key pair for Linux VMs in Azure.

2. Associate a Public IP with the created machine.

3. Open a web browser and go to https://<ip_address_of_the_machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete, and you will be able to start using Hystax Acura.

4. Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

5. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

6. Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_azure

Field Description Example
Subscription ID ID of Azure subscription f47b3e31-7c86-436b-baa1-a44938198b8e
Application ID Application (client) ID of the registered application in Azure. See how to create this ID and secret here: https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal-portal 405b2a3f-6df5-4724-9a2b-e8061f560c89
Tenant Directory (tenant) ID (can be found in Azure Active Directory/Properties) 1338dcc9-f703-4c56-b9d5-a6fe5493f757
Secret Secret string that the application uses to prove<br. its identity when requesting a token. Can also be referred to as an application password. Err:501
Region Azure region name westeurope
Group name Target resource group name acura
Cloud agent subnet Subnet in format “<network_name>/<subnet_name>” acura-vnet/default
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Hystax Acura Control Panel Public IP Public IP that will be used to access the Hystax Control Panel via web browser and by replication agents 18.5.123.15

Other additional parameters:

Field Description
Availability zone Availability zone where all resources will be created
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent image ID Id of the cloud agent image from the target cloud
Cloud agent image reference Reference to image for cloud agent in JSON format, for example: {"publisher": "value", "offer": "value", "sku": "value", "version": "value"}
Cloud agent marketplace plan Name of the marketplace plan used for the cloud agent
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Replicated volume type Default volume type used to create volumes for replicated VMs
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

7. Step 4: Installation is complete, and you can now log in to the system using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

Flexible Engine#

Installation requirements#

  • Golden image with Hystax Acura (provided by request).
  • Flexible Engine virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a VM with 2 vCPUs, 4Gb RAM, 40GB disk for the Hystax Cloud Agent. Created in each target / failover project.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443
      • Ingress -- tcp/4443
      • Ingress -- udp/12201
    • Hystax Cloud Agent (spawned automatically in the Target
      Project):
      • Ingress -- tcp/80

Installation steps#

1. Deploy a virtual machine from the golden image with a key pair attached and launch it in the Flexible Engine cloud.

Note

Adding a key pair during Acura's deployment is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to Flexible Engine's official documentation on using an SSH public-private key pair.

2. Upload the provided Cloud Agent image to your target project and rename it to Hystax_CATI.

3. Open a web browser and go to https://<ip_address_of_the_machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete and you will be able to start using Hystax Acura.

4. Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

5. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

6. Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_flexible_engine

Field Description Example
Keystone API Endpoint Flexible Engine Keystone authentication URL http://controller.dts.loc:35357/v3
User Domain User domain name to access Flexible Engine default
Username Username to access Flexible Engine admin
Password Password to access Flexible Engine passw
Target Project Domain Target Flexible Engine project domain name default
Target Project Name Target Flexible Engine project name where replicated workloads will be spun up TargetProj
Hystax Service VPC ID VPC ID that will be used for Hystax Cloud Agent machines. Should be the same or routable to the network in which a Hystax Acura instance is located 2ed1d818-a744-4341-8172-2c5349c6418d
Floating IP Network External network that will be used to attach Floating IPs to migrated machines. Most Flexible Engine clouds have “admin_external_net” admin_external_net
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Availability zone Availability zone where all resources will be created eu-west-0a
Hystax Acura Control Panel Public IP Public IP that will be used to access the Hystax Control Panel via web browser and by replication agents 192.168.0.10

Other additional parameters:

Field Description
API endpoint for block storage service Override API endpoint for block storage service. Useful on clouds with broken service catalog.
API endpoint for compute service Override API endpoint for compute service. Useful on clouds with broken service catalog.
API endpoint for image service Override API endpoint for image service. Useful on clouds with broken latest API version.
API endpoint for network service Override API endpoint for network service. Useful on clouds with broken service catalog.
API version for block storage service Override API version for block storage service. Useful on clouds with broken latest API version.
API version for compute service Override API version for compute service. Useful on clouds with broken latest API version.
API version for image service Override API version for image service. Useful on clouds with broken latest API version.
API version for network service Override API version for network service. Useful on clouds with broken latest API version.
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent image ID Id of the cloud agent image from the target cloud
Cloud agent security group Security group used by Cloud Agents
Cloud agent volume type Cloud agent volume type
Cloud site parallel resources limit How many resources of the same type are allowed to be created in parallel during Cloud Site creation
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Disable failback ports Disable custom ports for failback (they will be created by the cloud automatically)
Disable failover ports Disable custom ports for failover (they will be created by the cloud automatically)
Key pair name Key pair name to access the cloud agent
Region Target region name
Replicated volume type Default volume type used to create volumes for replicated VMs
Save OS type in metadata Save OS type in image volume metadata (only for Windows machines)
Security group Name of the security group with all required ports opened
Use cloud agent image for replications Use cloud agent image as a base for replication volumes instead of temporary automatically-created images
Use cloud volumes directly Check this box to disable snapshot creation in cloud and use cloud volumes directly. Warning: not all controller functionality is supported in this mode. If unsure, keep this setting off.
Use cloud-native UEFI By default, all UEFI VMs are automatically converted to boot through BIOS. Set this parameter to disable conversion and use cloud-native UEFI boot instead. Please note, that some clouds support BIOS boot only and require this parameter to be disabled.
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

The specified Flexible Engine user should have the following rights for Hystax Acura to operate correctly:

  • Import image
  • Launch instance
  • Create volume
  • Attach volume to instance
  • Detach volume from instance
  • Create volume snapshot
  • Create volume from snapshot
  • Remove snapshot
  • Remove volume
  • Manage networks

7. Step 4: Installation is complete, and you can now log in to the system using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

Google Cloud Platform#

Installation requirements#

  • Golden image with Hystax Acura (provided by request).
  • Resources to launch a virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a VM with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Cloud Agent. Created in each target / failover project.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443
      • Ingress -- tcp/4443
      • Ingress -- udp/12201
    • Hystax Cloud Agent (spawned automatically in the Target
      Project):
      • Ingress -- tcp/80
      • Ingress - tcp/15000

Installation steps#

1. Download Acura and Cloud Agent archives provided by Hystax.

Go to Storage → Browser section in GCP UI and open one of your buckets. Create one if there are no buckets. Upload the archives to the selected bucket. Wait till the upload is finished.

step1_download

2. Create an image for Acura.

Go to Compute Engine → Images section in GCP UI and press Create image: - Set Cloud storage file as a source. - Choose the Acura archive as the cloud storage image file. - Choose the region you will use for Acura instance deployment. - The image name is not important, you can put something like “hystax-acura“ there.

step2_rename-image

Once the image is created, it is safe to remove the Acura archive from the cloud storage bucket.

3. Create an image for Cloud Agent.

Go to Compute Engine → Images section in GCP UI and press Create image:

  • Set Cloud storage file as a source.
  • Choose the Cloud Agent archive as the cloud storage image file.
  • Choose the same region you used for the Acura image.
  • The image name must be set to “hystax-cati”.

step3_cloudagent

4. Create firewall rules for the Acura instance.

Go to the VPC network → Firewall rules section in GCP UI. Create a new rule:

  • Choose the network you will use for Acura deployment.
  • Set “acura“ in Target tags.
  • Allow the following ports:
    • tcp: 22, 80, 443, 4443, 30080, 30081, 30082,
    • udp: 12201.

step4_firewallrule

5. Create firewall rules for Cloud Agent.

During replications, Acura will automatically create Cloud Agent instances and talk to them over the private network. Make sure that there is a firewall rule that permits communication inside your network.

For the “default“ network this rule is already created by Google:

step5_firewallrule

If you are going to deploy Acura to a non-default network, create a similar rule for this network:

  • Set “Targets“ into All instances in the network.
  • Set “IP ranges“ to the CIDR range of your network.
  • Allow all ports.

6. Create an Acura instance.

Go to Compute Engine → VM instances section in GCP UI and press Create Instance:

  • Choose a flavor that meets the minimum requirements or better.

  • In “Boot disk“ choose the Acura image from the Custom Images tab and set the disk size to at least 100GB. The SSD disk type is recommended.

  • Select Service account that has permissions:

    • compute.addresses.use
    • compute.disks.create
    • compute.disks.createSnapshot
    • compute.disks.delete
    • compute.disks.get
    • compute.disks.setLabels
    • compute.disks.use
    • compute.images.useReadOnly
    • compute.instances.attachDisk
    • compute.instances.create
    • compute.instances.delete
    • compute.instances.detachDisk
    • compute.instances.get
    • compute.instances.list
    • compute.instances.setLabels
    • compute.instances.setMetadata
    • compute.instances.setServiceAccount
    • compute.instances.setTags
    • compute.instances.updateDisplayDevice
    • compute.machineTypes.get
    • compute.snapshots.create
    • compute.snapshots.delete
    • compute.snapshots.get
    • compute.snapshots.list
    • compute.snapshots.setLabels
    • compute.snapshots.useReadOnly
    • compute.subnetworks.use
    • compute.subnetworks.useExternalIp
    • compute.zones.get
    • iam.serviceAccounts.actAs
    • iam.serviceAccounts.get
    • iam.serviceAccounts.list
    • resourcemanager.projects.get

    All of these permissions are part of the global roles:

    • Compute Admin,
    • Service Account User.

  • Allow full access to all cloud APIs for this instance. Acura won’t be able to run without cloud API access.

  • Open Management, security, disks, networking, sole tenancy spoiler and navigate to Networking tab:

    • Put “acura“ to Network tags. This will enable the firewall rule created earlier.

    • Edit the default network interface: create a fixed external IP instead of a temporary one. This will prevent Acura from losing its public IP on shutdown/reboot.

Press Create to run the Acura instance.

step6_createinstance

Note

You don’t need to create Cloud Agent instances: Acura will run them automatically using the image created earlier.

7. Pass Acura Initial Configuration.

Step 1: Enter the organization name and new Hystax Admin user credentials in the Setup Wizard. This will be the user account for logging in to the Hystax Acura Control Panel and system management. If any errors occur, the system will notify you.

Step1

Step 2: Fill in the Hystax license key you received in advance, as well as access settings for your mail server, which will be used to send notifications from Acura and generate periodic reports. If you prefer a public SMTP server associated with your email address (Gmail, Yahoo, etc.), please look it up online. For a private SMTP server, contact your network administrator for more details. Please note that only SMTP servers with SSL/TLS encryption are supported. A sample notification will be sent to the specified "Test email address" to test functionality.

Step2

Step 3. During the initial setup, the cloud will be configured automatically, you just need to click the "Next" button.

Step3_gcp

If you are adding a new cloud or decide to edit an automatically created one, you will see the following form:

Step3_gcp_new

Field Description Example
Cloud name The name of the cloud which will be shown in UI. The name must be unique. Hystax-acura
Zone Cloud zone name for replicated workloads. eu-west-1
Service account key Cloud service account key in JSON format.
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage

Other additional parameters:

Field Description
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent image ID ID of the cloud agent image from the target cloud
Cloud agent security group Security group used by Cloud Agents
Cloud agent subnet Subnet where cloud instances will be spun up
Cloud agent volume type Cloud agent volume type
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Replicated volume type Default volume type used to create volumes for replicated VMs
Security group Name of the security group with all required ports opened
Use multi-regional snapshots Create multi-regional snapshots instead of regional snapshots
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

Press “Next” to run cloud check. If this check fails with permission errors, please verify that the Acura instance has full access to all cloud APIs.

Note

You will need to shut down the instance to change its permission settings.

Step 4. Installation completed. You can now sign in using the credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

OpenNebula#

Installation requirements#

  • Resources to run a virtual machine with 8 VCPUS, 16 GB of RAM, 200 GB of disk is based on the Acura Hystax Image.

  • Resources to run a virtual machine with 2 VCPUS, 4 GB of RAM, 20 GB of disk for the Hystax cloud agent. Created in every OpenNebula target/failover project.

  • Security groups that allow the following traffic:

  • Hystax Acura Controller:
    • Port -- tcp/443
    • Port - tcp/4443
    • Port - udp/12201
  • Hystax Cloud Agent (automatically created in the Target Project):
    • Port -- tcp/80
    • Port - tcp/15000

More detailed requirements are available at the link.

Installation steps#

1. Deploy the virtual machine from the Image with the key pair attached and run it to the OpenNebula cloud.

Note

It is highly recommended to add a key pair to give you SSH access to the machine.

It takes from 10 to 20 minutes to start the service and gain access to the web interface.

2. Upload the cloud agent image named Hystax_CATI to the target project.

3. Open a web browser and navigate to https://<machine_ip>/. You will be redirected to the Hystax setup wizard. After completing all the steps, the installation will be completed. Once completed, you will be able to start using Hystax Acura.

4. Step 1: Enter the organization name and new Hystax Admin user credentials in the Setup Wizard . This will be the user account for logging in to the Hystax Acura Control Panel and system management. If any errors occur, the system will notify you.

Step1

5. Step 2: Fill in your Hystax license key you received in advance, as well as access settings for your mail server, which will be used to send notifications from Acura and generate periodic reports. If you prefer a public SMTP server associated with your email address (gmail, yahoo, etc.), please look it up online. For a private SMTP server, contact your network administrator for more details. Please note the only SMTP servers with SSL/TLS encryption are supported. A sample notification will be sent to the specified "Test email address" to test functionality.

Step2

6. Step 3: Complete all fields by providing cloud configuration details. You can click on the "?" for field tips. After clicking the "Next" button, the installation wizard will confirm the correctness of the entered data and notify you in case of an error.

Step3_opennebula

Field Description Example
XML-RPC endpoint URL for OpenNebula XML-RPC API https://one.example.com:8443/RPC2
Username Username to access OpenNebula admin
Password Password to access OpenNebula password
Target datastore Default storage name for replicated disks in OpenNebula datastore1
Hystax Service Network The network to be used for the cloud agent machines. Must be the same as, or routable to, the network where the Hystax Acura instance resides vnet1
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Hystax Acura Control Panel Public IP The public IP address that will be used to access the Hystax control panel through a web browser and replication agents 192.168.0.10

Other additional parameters:

Field Description
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent image ID Id of the cloud agent image from the target cloud
Cloud agent security group Security group used by Cloud Agents
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
CPU model CPU model for created VMs
P2V type In this field, you can specify a non-standard P2V - for example, for cloud "Virtuozzo, you need to specify "virtuozzo".
Security group Name of the security group with all required ports opened

The specified user must have the following rights for Hystax Acura:

  • Loading an image

  • Instance launch

  • Volume creation

  • Attaching a volume to an instance

  • Detaching a volume from an instance

  • Create a volume snapshot

  • Create a volume from a snapshot

  • Deleting a snapshot

  • Deleting a volume

  • Network management

7. Step 4. Installation completed. You can now sign in using the credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

Troubleshooting OpenNebula#

Hystax Acura automatically checks for cloud access and necessary permissions to ensure the operation is complete. It provides detailed error messages that describe possible causes of problems. In case of an error, please check the correctness of the entered data and the availability of the necessary permission. If you encounter difficulties during the installation process and have any questions, you can contact the Hystex support service using the contact information provided below. The Hystax Support Portal is available at https://support.hystax.com/. There you can find all articles from our Knowledge Base. You can also submit support requests in your personal account.

OpenStack#

Installation requirements#

  • Mitaka+ version of OpenStack (Red Hat, Canonical, Suse, Mirantis, CentOS and Vanilla distributives are supported).
  • Golden image with Hystax Acura (provided by request).
  • Resources to launch a virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a VM with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Cloud Agent. Created in each target / failover OpenStack project.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
    • Ingress -- tcp/443
    • Ingress -- tcp/4443
    • Ingress -- udp/12201
    • Hystax Cloud Agent (spawned automatically in the Target Project):
    • Ingress -- tcp/80
    • Ingress - tcp/15000

Installation steps#

1. Make sure that there is an access to the OpenStack Service Endpoints from the Hystax Acura network. Acura requires access to Keystone (or Identity), Compute, Volume, Image and Network Service Endpoints. Basically it is enough to specify the Keystone API endpoint on the third step of the installation. However if necessary add any of these parameters on the Additional parameters tab on the third step. To do this, select one from the list of available parameters and enter its value in the field that appears.

2. Deploy a virtual machine from the golden image with a key pair attached and launch it in the OpenStack cloud.

Note

Adding a key pair is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to OpenStack's official documentation on adding an SSH public-private key pair to VMs.

It takes from 10 to 20 minutes for the services to start and the Web UI to become available.

3. Open a web browser and go to https://<ip_address of the machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete, and you will be able to start using Hystax Acura.

4. Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

5. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

6. Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_openstack

Field Description Example
Keystone API Endpoint OpenStack Keystone authentication URL http://controller.dts.loc:35357/v3
User Domain User domain name to access OpenStack default
Username Username to access OpenStack admin
Password Password to access OpenStack passw
Target Project Domain Target OpenStack project domain name default
Target Project Name Target OpenStack project name where replicated workloads will be spun up TargetProj
Hystax Service Network Network that will be used for Hystax Cloud Agent machines. Should be the same or routable to the network in which a Hystax Acura instance is located provider
Floating IP Network External network that will be used to attach Floating IPs to migrated machines provider
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Hystax Acura Control Panel Public IP Public IP that will be used to access the Hystax Control Panel via web browser and by replication agents 192.168.0.10

Other additional parameters:

Field Description
Add custom x-sdn header Add custom x-sdn header for Neutron requests
Add qemu_agent meta Insert qemu_agent meta parameters into metadata of volumes created by Acura
API endpoint for block storage service Override API endpoint for block storage service. Useful on clouds with broken service catalog.
API endpoint for compute service Override API endpoint for compute service. Useful on clouds with broken service catalog.
API endpoint for image service Override API endpoint for image service. Useful on clouds with broken latest API version.
API endpoint for network service Override API endpoint for network service. Useful on clouds with broken service catalog.
API version for block storage service Override API version for block storage service. Useful on clouds with broken latest API version.
API version for compute service Override API version for compute service. Useful on clouds with broken latest API version.
API version for image service Override API version for image service. Useful on clouds with broken latest API version.
API version for network service Override API version for network service. Useful on clouds with broken latest API version.
Availability zone Availability zone where all resources will be created
Cloud agent flavor Flavor to use for the cloud agent instances
Cloud agent flavor requirements Requirements for cloud agent flavor in JSON format, for example: {"cpu": "value", "ram": "value", "hdd": "value"}
Cloud agent image ID Id of the cloud agent image from the target cloud
Cloud agent security group Security group used by Cloud Agents
Cloud agent volume type Cloud agent volume type
Cloud site parallel resources limit How many resources of the same type are allowed to be created in parallel during Cloud Site creation
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Disable failback ports Disable custom ports for failback (they will be created by the cloud automatically)
Disable failover ports Disable custom ports for failover (they will be created by the cloud automatically)
Flatten manager URL URL of service which will be called for performing flatten operations on volumes of the detached machines
Insert os_tag key Name of tag containing description of OS installed on device which will be inserted into metadata of volumes created by Acura
Key pair name Key pair name to access the cloud agent
Minimal count of cloud agents Minimum count of cloud agents which should stay alive according scaling policy
Minimal volume size Minimal size in gigabytes for replicated volumes. If source volume is smaller, target cloud volume will be extended up to minimal size.
P2V type In this field, you can specify a non-standard P2V - for example, for cloud "Virtuozzo, you need to specify "virtuozzo"
Region Target region name
Replicated volume type Default volume type used to create volumes for replicated VMs
Save OS type in metadata Save OS type in image volume metadata (only for Windows machines)
Security group Name of the security group with all required ports opened
Set custom image metadata Set custom image metadata for replicated VMs. Must be a JSON object or a comma-separated string of key=value pairs.
For example, hw_scsi_model=virtio-scsi,hw_disk_bus=scsi.
Alternatively, this parameter can be set in the DR plan. Note that if you set the parameter both in the initial configuration and in the DR plan, the DR plan settings take priority and will be applied to the cloud, even if the value is an empty string.
Use cloud volumes directly Check this box to disable snapshot creation in cloud and use cloud volumes directly. Warning: not all controller functionality is supported in this mode. If unsure, keep this setting off.
Use cloud-native UEFI By default, all UEFI VMs are automatically converted to boot through BIOS. Set this parameter to disable conversion and use cloud-native UEFI boot instead. Please note, that some clouds support BIOS boot only and require this parameter to be disabled.
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

The specified OpenStack user should have the following rights in order for Hystax Acura to operate correctly:

  • Import image
  • Launch instance
  • Create volume
  • Attach volume to instance
  • Detach volume from instance
  • Create volume snapshot
  • Create volume from snapshot
  • Remove snapshot
  • Remove volume
  • Manage networks

7. Step 4: Installation is complete, and you can now log in to the system using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

oVirt#

Installation requirements#

  • Golden image with Hystax Acura (provided by request).
  • Resources to launch a virtual machine with 8 vCPUs, 16GB RAM, 200GB disk created from the Hystax Acura Golden image.
  • Resources to launch a virtual machine with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Cloud Agent. Created in each target / failover oVirt project.
  • Resources to launch a virtual machine with 2 vCPUs, 4GB RAM, 20GB disk for the Hystax Replication Agent in case if a customer wants to use an external replication agent.
  • SMTP server with TLS/SSL encryption.

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443
      • Ingress -- tcp/4443
      • Ingress -- udp/12201
    • Hystax Cloud Agent (should be downloaded and deployed manually):
      • Ingress -- tcp/80
      • Ingress - tcp/15000

Installation steps#

  1. Deploy a virtual machine with a key pair attached and launch it in the cloud.

Note

Adding a key pair is highly recommended to provide you with SSH access to the machine. Although Hystax Engineering team will be able to perform maintenance checks and troubleshooting (as long as the network is reachable and your security groups allow the corresponding traffic), it is better to have your own means of accessing the Acura instance. Please refer to oVirt's official documentation on adding an SSH public-private key pair to VMs.

It takes from 10 to 20 minutes for the services to start and the Web UI to become available.

2. Open a web browser and go to https://<ip_address of the machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete, and you will be able to start using Hystax Acura.

3. Step 1: Enter the organization name and new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

4. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

5. Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_ovirt

Field Description Example
oVirt API endpoint oVirt API Endpoint of target cloud https://ovirtnode/ovirt-engine/api
Username Username to access the target cloud admin
Password Password to access the target cloud passw
Replication storage type Choose storage type to use for replicated data Cloud-native block storage
Storage domain Storage domain ID or name that will be used for replication domain
Datacenter Target datacenter ID or name where replicated workloads will be spun up datacenter
Host Target host where replicated workloads will be spun up host
Hystax Acura Control Panel Public Address Public IP or DNS name which will be used to access the Hystax Control Panel via web browser and any replication agents 192.168.0.10

Other additional parameters:

Field Description
Allocation policy Allocation policy for disks thin or preallocated
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Disk format Override the default disk file format qcow2 or raw
Host Target host where replicated workloads will be spun up
P2V type In this field, you can specify a non-standard P2V - for example, for cloud "Virtuozzo, you need to specify "virtuozzo"
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent

The specified user should have an unlimited number of active sessions for Hystax Acura to operate correctly.

6. Step 4: Installation is complete, and you can now log in to the system using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

VMware#

Installation requirements#

  • OVA with Hystax Acura (provided by request)
  • Hystax Acura Controller from the provided OVA with not less than 8 vCPUs and 16GB RAM and a 200GB disk
  • Hystax Acura Cloud Agent requires at least 2 vCPUs and 4GB RAM
  • A user with administrative permissions to operate VMware APIs
  • SMTP server with TLS/SSL encryption

  • Security groups allowing the following traffic:

    • Hystax Acura host:
      • Ingress -- tcp/443;
      • Ingress -- tcp/4443;
      • Ingress -- udp/12201.
    • Hystax Cloud Agent (launched manually in the target ESXi or
      vCenter cluster):
      • Ingress -- tcp/80;
      • Ingress - tcp/15000;
      • Egress -- tcp/443 (from Cloud Agent to ESXi/vCenter)
      • Egress -- tcp/udp 902 (from Cloud Agent to ESXi host).

  • Source network should have DHCP enabled to allow communication between Acura's components. If that is not possible, please assign static IPs for the instances by editing their network configuration. Find additional information in our Knowledge Base.

Installation steps#

1. Create a machine from the OVA with Hystax Acura and start it.

2. Open a web browser and go to https://<ip_address_of_the_machine>/. You will be redirected to the Hystax Setup Wizard. After you perform all the steps, the installation will be complete, and you will be able to start using Hystax Acura.

3. Step 1: Enter an organization name and the new Hystax Admin User credentials into the Setup Wizard. This will be the user account for logging in to the Hystax Acura Control Panel and managing the system. If there are any errors, the system will notify you.

Step1

4. Step 2: Fill in your Hystax License key that was supposed to be shared with you in advance as well as the settings for accessing your mail server, which will be used to send notifications from Acura and generate periodic reports.

Warning

SMTP server with TLS/SSL encryption is required to proceed with deployment.

If you prefer a public SMTP server associated with your email address (gmail, yahoo etc.), please find its settings online. In case of a private SMTP server, contact your network administrator for further details.

A sample notification will be sent to the specified "Test email" to verify the functionality when you click "Next".

Step2

5. Step 3: Fill in all the fields by providing cloud configuration details. Use question mark icons to get hints on the fields. After you click "Next", the Setup Wizard will validate the entered data and notify you in case of an error.

Step3_vmware

Field Description Example
Endpoint IP or FQDN of the target vCenter or ESXi host my.vmware.loc
Login User that will be used to work with Vmware APIs. In order for the solution to work properly, this user must have.Administrative permissions. acura_admin
Password Password for the provided user mypass
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
Use vCloud Director Check this box to registry machines in vCloud Director automatically off
Target ESXi hostname Hostname of the ESXi host that the machines will be replicated to localhost
Target datastore Name of the datastore that the machines will be replicated to Datastore1
Hystax Acura Control Panel
Public IP		 Public IP which will be used to access the Hystax Control Panel via web browser and by replication agents 18.5.123.15

Other additional parameters:

Field Description
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Resource pool Override the default VMware resource pool
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent
vCloud Director API version Provide a specific vCloud Director API version to use, for example "31.0"
VM hardware version Override the default VM hardware version, example: vmx-12

6. Step 4: Installation is complete, and you can now log in to the Acura Control Panel (ACP) using credentials entered in the first step.

Step4

Congratulations, you are now ready to use Acura! Just enter the administrator username and password specified on the first step of installation in the login page of the solution.

Installation with vCloud Director#

In case of using vCD in your VMware setup, check the corresponding box at Step 3 and fill in the extra mandatory fields needed to access the target environment.

Warning

Acura requires at least Organization Admin credentials to operate with vCloud.

Step3_vcd

Field Description Example
Endpoint IP or FQDN of the target vCenter my.vmware.loc
Login User that will be used to work with VMware APIs. Administrative permissions are mandatory for the user. Assign a global permission at the root object level with "Propagate to children" selected. More info about global permissions at the root object is available here acura_admin
Password Password for the provided vCenter user mypass
Replication storage type Choose storage type to use for replicated data. Migration and recovery from cloud-native block storage is fastest, but the other storage types can be cheaper. Cloud-native block storage
vCloud Director endpoint IP or FQDN of the vCloud Director to connect to my.vmware.vcd
Login Username to log into the vCloud Director vcd_admin
Password Password for the provided user mypass
Organization name Default organization for registering machines Myorganization
Organization VDC Default Virtual Data Center for the machines Datastore1
Default vApp name Default vApp name to register machines My_vAPP
Hystax Acura Control Panel Public IP Public IP which will be used to access the Hystax Control Panel via web browser and by replication agents 18.5.123.15

Other additional parameters:

Field Description
Cloud site replications launch timeout (minutes) Timeout for a launch of replications during Cloud Site creation (in minutes)
Cloud site replications timeout (minutes) Timeout for a replications during Cloud Site creation (in minutes)
Cloud site timeout Cloud site creation timeout in minutes
Resource pool Override the default VMware resource pool
Use public IP for cloud agent Cloud Agent will be created with public IP and Acura will use public IP to connect to Cloud Agent
vCloud Director API version Provide a specific vCloud Director API version to use, for example "31.0"
VM hardware version Override the default VM hardware version, example: vmx-12

Hystax Support Portal | Contact Support: [email protected] | Terms of use | © Copyright 2024 | Hystax | All rights reserved